1

How Do I Connect My Xumo to My TV?

Plug In, Stream On: Your Xumo TV Setup Made Simple.

xumotvhelpdesk

Last Update 2 maanden geleden

Connecting your Xumo device to your TV is a simple process that varies slightly depending on whether you’re using a Xumo Stream Box or a Xumo TV. Here’s how to get it done efficiently so you can start streaming.


Steps for Connecting a Xumo Stream Box


  1. Gather Your Equipment: You’ll need the Xumo Stream Box, its power adapter, an HDMI cable (included), and your TV’s remote.
  2. Plug in the HDMI Cable: Connect one end of the HDMI cable to the Xumo Stream Box and the other to an available HDMI port on your TV. Note the HDMI port number (e.g., HDMI 1, HDMI 2).
  3. Power Up the Device: Attach the power adapter to the Xumo Stream Box and plug it into a wall outlet. The device should light up.
  4. Switch TV Input: Turn on your TV and use your TV remote to select the correct HDMI input (e.g., HDMI 1) where the Xumo is connected.
  5. Insert Batteries: Place the included batteries into the Xumo voice remote, and follow the on-screen setup prompts to connect to WiFi and activate.


Steps for Connecting a Xumo TV


  1. Position the TV: Place your Xumo TV on a stable surface or mount it if preferred.
  2. Connect Power: Plug the power cord into the back of the TV and then into a wall outlet.
  3. Turn On: Press the power button on the TV or use the Xumo voice remote (add batteries first).
  4. Select Input (If Needed): If your Xumo TV is pre-integrated, it’ll boot directly to the Xumo interface. If connected to other devices, ensure the TV input is set to its internal source.
  5. Internet Setup: Connect to WiFi or use an Ethernet cable during the on-screen setup.


Internet Connection Options


  • WiFi: During setup, select your network and enter the password using the on-screen keyboard.
  • Ethernet: For a wired connection, plug an Ethernet cable into the Xumo device or TV and your router before powering on.


Finalizing the Setup


  • Once connected, you’ll see an activation code on your TV screen. Visit xumo.com/activate on a separate device, enter the code, and sign in or create an account to complete the process.
  • After activation, your Xumo will be ready to stream from its home screen.


Troubleshooting Connection Issues


  • No Picture? Ensure the HDMI cable is secure and the correct TV input is selected.
  • No Power? Check that the power adapter is plugged in and the outlet works.
  • Remote Not Pairing? Hold the remote close to the device during setup and press the pairing button if prompted.

Enjoy streaming over 350 free channels and thousands of on-demand titles with your Xumo once it’s connected!

Related Searches

Was this article helpful?

0 out of 0 liked this article